|Mordern fashion design with various colors to choose|
|2||Intelligent PDA management system|
Steahy microwave induction technology
Main board fits for harsh environment due to it has passed the test of extreme temperature, shock and aging
|5||The main board adopts microcomputer chip-level design of PIC military standard|
|6||Convenient to replace anti-theft mechanical lock; highly optimized for general use|
|7||Anti-theft lock body|
|8||Internation standard of 5-latch lock body|
|9||Supports "one-card" setting|
|10||Waterproof, Moisture-proof and Mildew|
|11||Heaven and earth pull rod locker(easy to replace for mechanical locker)|
|12||23.5cm of standard hole distance anti-theft body|
|13||Door thickness should be 38mm-60mm|
|14||Low voltage warning|
|Available for cards||EM card, Temic 5567, Temic 5557/Mifare-1|
|Memory unlocking record||225pcs|
|Low voltage warning||Warning and lighting when powervoltage is below 4.8V|
|Battery Life||More than 5000 time for unlocking|
|Executive body||DC micro motor|
|Working Temperature||-20 °C ~ 50 °C|
|Humidity||-20%RH ~ 80%RH|
|Static Current/Dynamic Current||<25uA/<150uA|
|Power Supply||4 pieces of 1.5V NO.5 AA alkaline batteries|
|Service Life||≥ 15 years|
The Door Lock System
It is used to make time cards, Door No. Cards, guest cards and so on. It is mainly used for
checking in and checking out.
It reads the data in the cards, implements the corresponding operations of time synchronizer,
locking, unlocking and so on.
|Management software make cards through the card reader.|
The unlockin g records are transferred from the door lock to the encoder by infrared induction.
After connecting the encoder to a computer, the software will read its data(unlocking records.)
There are time synchronizer cards, Door No. Cards, guest cards, general cards, building cards,
floor cards, checkingout cards, loss registration cards and so on. You can choose Card T5557
(Non-contact and cheap), Mi-fare Card (Non-contact, can be made all purpose card and
expensive), IC Card (Contact-based, easy to be destroyed and cheap).
When the management software is installed, a serial No. is created. Then you have to send
the serial No. to our company, we will send a corresponding registration code to you. You can
use the management software after filling in the registration code.
Search Results For: